Positive-to-Negative Ground Standard Converter
![]() |
Positive-to-Negative Ground Standard Converter
POSITIVE-TO-NEGATIVE GROUND STANDARD CONVERTER Positive-to-negative ground converters produce regulated 12.6-volt DC negative-ground output from 4- to 16-volt input. Continuous capacities of standard converter: 16 Watts (1.3 amps) with 6-volt input to 26 Watts (2.1 amps) with 12-volt input. Converter is small�1-3/4" cube�and light�about 9 oz.�fits easily on the accessory it serves or behind your dash. Uses common ground; no isolation required. Reverse polarity overload and short-circuit protection. Low (10 mA) no-load current minimizes draw on battery when an alarm system or radio/clock with memory is in use. Please note: Check continuous and peak power requirements before ordering. 1) With your vehicle's 6-volt input and these inverts/converts a high-output 12-volt sound system may perform effectively at low volume but not for extended periods beyond the converter's stated capacities. 2) Output is reduced by weak batteries malfunctioning electrical systems and poor connections. Not recommended for: power-actuated door locks trunk release solenoids air conditioner clutches fans blowers power windows or other electromechanical devices.
|
